The word ‘garment’ is mentioned in the Bible as a covering for both clothes and body. In addition, it was typically hidden under one outer garment. This meaning of ‘garment’ has translated into religious garments such as when priests wore robes or monks wore either white garments or black ones. The term ‘add’ means to put on clothing which suggests a number of meanings including adding something new onto an old piece of clothing, like dyeing the cloth with new colors; putting on another article that is intended to be worn over top of what you already have, like wearing winter gloves over your summer gloves; or just simply dressing up more than usual by adding accessories (like jewelry)

What is ADD garment on Maytag washer?

An ADD garment is a special fabric that helps to prevent the build-up of lint and other debris in your washer. It also helps to reduce the amount of water needed for cleaning.

How do I add a garment to my LG washer?

You can add garments to your LG washer by following these steps:
1. Open the door of the washer and locate a small tab on the front of the drum unit.
2. Press down on this tab with a pen or pencil and rotate it until you hear a click.
3. Remove the garment from its packaging, then place it over top of the drum unit so that it is completely covered in fabric.
4. Close the door and turn on your

What does sensing mean on a Maytag washer?

Sensing is the process of measuring or detecting changes in the environment. It can be used to detect sound, light, temperature, pressure, humidity, and other physical properties.

Why is my Whirlpool washer stuck on sensing?

There are a few reasons why your Whirlpool washer may be sensing. One of the most common is that you have not properly installed the washer. You should also check to make sure that there is nothing blocking the water flow in the machine.

Which is better front or top load?

Front loaders are better for most people because they dont have to bend over as much when loading the washing machine. However, top loaders are more efficient and can wash a lot more clothes at once.

What is difference between front load and top load?

Front load washing machines have a door on the front of the machine that opens up, while top load washing machines have a door on the top of the machine.

How much water should be in a Samsung washer?

The amount of water you should put in your Samsung washer depends on the size of your load. If you have a large load, you will need to add more water than if you have a small load.

Why is my Samsung Washer using hot water on cold setting?

The washer is using hot water on cold setting because it thinks the temperature of the water is too low. This can be fixed by turning up the temperature to a higher level, or by manually adjusting the temperature of your water.

How do I add detergent to my Whirlpool washer?

To add detergent to your Whirlpool washer, you will need to remove the detergent dispenser. Then, place the detergent in a container and pour it into the dispenser.

How do I reset my Whirlpool auto load sensing washer?

If you are using a Whirlpool washer, the reset button is located on the top of the machine. If you are using a Maytag washer, it will be located on the front of your machine.

How do you stop a washing machine from shaking?

You can stop a washing machine from shaking by placing a towel or blanket on the top of the washer. This will prevent the vibrations from reaching your hands and arms.

Why does my Samsung washer keep pausing itself?

The Samsung washer is pausing because it is sensing that the load is too heavy. This can happen if you have a lot of laundry in the machine, or if there are items stuck on the bottom of the tub.

How do I clean the filter on my Samsung top load washer?

To clean the filter on your Samsung top load washer, you must first remove the filter from the machine. Then, use a vacuum cleaner to suck up any dust and debris that may have accumulated in the filter. Next, spray down the filter with water and let it sit for several hours before putting it back into the machine.

Why is my Samsung front load washer leaking from the bottom?

The most likely cause is that the washer has a leaky seal. This can be caused by a number of things, including clogged hoses or worn out seals. Check to make sure all your hoses are clear and that the rubber seal on the washer door is intact. If it is, you will need to replace the seal.

Why would a washing machine leak from underneath?

This is a very common problem that can be caused by a number of things. It could be due to the washer being overloaded, or it could be because there is something wrong with the machine itself.

Can I change the song on my Samsung washer?

Unfortunately, Samsung does not allow users to change the song on their washer. This is due to copyright restrictions that Samsung fears would be leveled against them should they allow something like this.

Why do front loaders smell?

Front loaders are designed to be more efficient at loading and unloading products, but they also have a tendency to smell due to the lack of ventilation.

Why do eco washers take longer?

The eco washer is a machine that uses water to clean the dishes. It has two parts, one part is the pump and the other part is the filter. The pump pushes water through the filter which cleans it before it goes back into the sink.

Why is my washer steaming?

Your washer may be steaming because it is not getting enough water. This can happen when the water level in your tub is too low, or if the drain hose has a clog.

Why does my Whirlpool washer say add garment?

The Whirlpool washer has a built-in sensor that detects when you are putting in clothes and needs to be cleaned. This is because the machine can only clean so much before it needs to be emptied.

Why does my Whirlpool washer say detergent low?

This can happen for a number of reasons, but the most common is that you have not added enough detergent. You should always add at least two cups of detergent to your washer when adding it for the first time.

Why does my washing machine take 3 hours?

Your washing machine is probably not set to the correct temperature. You can find the recommended settings for your washing machine on the manufacturers website.

When should I use deep fill?

Deep fill is a technique that can be used to make your Beat Saber experience more enjoyable. Its best used when youre playing with a group of people, and its also helpful for songs that have many different sections.

How do you put a Whirlpool washer in diagnostic mode?

To put a Whirlpool washer in diagnostic mode, you will need to turn the dial on the front of the machine. This is usually located near the water fill line.

Why do you have to calibrate a Whirlpool washer?

To get the best cleaning performance, you need to calibrate your washer. This is done by filling it with a special solution that ensures that the machines sensors are working properly.

How do I clean the filter on my Samsung top load washer?

To clean the filter on your Samsung top load washer, you should first turn off the machine and unplug it. Then, remove the filter from the front of the machine by pulling it straight up and out. Next, fill a bucket with water and add 1 cup of white vinegar to it. Pour this mixture into the bottom of your washer until it is full. Turn on your machine and let it run through a cycle without clothes in it. After that cycle has finished,

Why is my washing machine not emptying water?

The water is not emptying because the drain hose has a kink in it. You can fix this by taking off the cover of the drain hose and straightening out the kink.

Why does my washing machine smell like rotten eggs when it runs?

This could be caused by a number of things. It is possible that the detergent you are using has expired, or it could also be due to an issue with the washing machine itself. If this is the case, then you should contact your local appliance repair shop to get it fixed.

Why is my washing machine moving when spinning?

The washing machine is most likely not spinning. It may be a broken washing machine that is just moving around on its own. If the washing machine is still moving after you have stopped it, then it could be because of a clogged drain or something else stuck in the drain pipe.

Why does my washer shake like crazy?

The washer is shaking because it has been overloaded. This can happen when you put too much laundry in the machine, or if you are using a heavy-duty detergent that contains a lot of sudsing agents.

How do I put my Samsung washer in diagnostic mode?

To put your washer in diagnostic mode, you need to press and hold the power button for 10 seconds. If it doesnt turn on after that, then you may have a problem with the motor or the main control board.

Why does my Samsung top load washer stink?

The Samsung top load washer is a front loading washer. This means that the water and detergent goes in from the front of the machine, not from the back like traditional top loaders. Because of this, when you use your Samsung top load washer, it will produce more suds than a standard top loader. If you are using your Samsung top load washer for an extended period of time, you may notice an unpleasant smell coming from it.


What model Samsung washing machines are being recalled?

Samsung is recalling certain models of washing machines. The recall is due to a defect in the control panel that can cause the machine to stop working and potentially start a fire.