While 10 inches is the rough in-toilet size, it can vary slightly depending on whether you are installing a new toilet or replacing an old one. To be sure about what length you need for your particular installation, please contact the manufacturer of your toilet and if possible find out from them exactly how much tubing will fit inside their toilets so that there are no issues with sizing.

This is a question that has been asked in the “What does 10 inch rough in toilet mean?” category. The answer to this question is found on Home Depot’s website.

What does 10 inch rough in toilet mean? |

The gap between the completed wall and the center of the toilet’s floor drain or waste outlet is referred to as the toilet rough-in. The rough-in for most toilets is 12 inches, while it’s not uncommon for older houses to have a smaller rough-in, such as 10″ or 14″. Toilets with rear-outlets are set up a little differently.

Is there a 10 inch rough in toilet made by Kohler in this regard?

Cimarron Toilet by Kohler (K-3851-0) If you’re searching for a high-quality 10-inch rough-in toilet, Kohler has you covered with a luxurious but affordable alternative. Furthermore, since it consumes 1.28 gallons of water every flush (less than the industry average), this 10-inch rough-in toilet is exceptionally water-efficient.

Aside from the aforementioned, what are the dimensions of a toilet rough? Toilets | Education | What is a Rough-In Toilet? The rough-in dimension of a toilet refers to the distance between the completed wall and the center of mounting holes on the floor flange. Toilets are commonly available in rough-in sizes of 10 inch, 12 inch, or 14 inch. In the United States, the 12 inch rough-in is by far the most popular.

What is the difference between a 10 and a 12 rough in toilet, for example?

Those figures represent the distance between the wall and the closet flange’s center (aka, where the johnny bolts that secure the toilet bowl go). Most toilet bowls will operate with a 10′′ or 12′′ distance, however a 10′′ rough tank is narrower to accommodate the shorter spacing.

How far away is the toilet from the wall?

Because standard drywall is 1/2 inch thick, the toilet flange should be installed at least 15-1/2 inches from the center of the flange to the wall frame by the plumber. 12 inches from the rear wall, or 12-1/2 inches from the center of the flange to the wall frame, is the usual distance.

Answers to Related Questions

Is there a 10 inch rough in toilet made by Toto?

Toto is recognized for producing high-quality toilets, and this Drake Series model is no exception, requiring a 10-inch rough-in to install. It’s a stylish two-piece toilet with good flushing performance and a slew of other high-end features. This toilet accomplishes a lot of things correctly.

How can you figure out how big a 10 rough in for a toilet is?

Measure from the wall behind the toilet to the center of the closet bolts that hold your toilet to the floor to determine the rough-in. That distance will very certainly exceed the typical rough-in measurements of 10′′, 12′′, or 14′′. Round down to the closest standard rough-in measurement.

What is the ideal toilet height?

In contrast to the typical 15 inches of a conventional toilet, today’s “comfort height” or “proper height” toilets have bowls that are 17 to 19 inches high. Taller persons, the elderly, and those with mobility issues may benefit from the greater bowl height, which may be beneficial to their knees and back.

How far can a toilet be moved with an offset flange?

An offset toilet flange on the waste water line allows you to relocate the toilet a few inches in any direction without cutting a new hole in the floor or reconstructing the waste water pipe.

What does it mean to have a compact elongated toilet?

The compact design fits an extended bowl into the area of a round front toilet, making it an excellent alternative for tiny bathrooms and limited places.

What is the typical toilet bowl size?

Standard toilets are 15 to 17 inches tall, whereas chair-style toilets are up to 17 inches tall. Shapes of toilet bowls include: Elongated toilet bowls, which may be up to three inches longer, take up more space than round toilet bowls.

What is the best way to install an offset toilet flange?

Place an offset toilet flange over the dirt pipe and measure from the flange’s center to the wall to determine the installation angle. Place the flange closest to the wall. With a pencil, trace the contour of the offset pipe under the flange onto the floor below.

Can a 14-inch rough-in toilet be replaced with a 12-inch rough-in toilet?

For a 14″ rough, any 12″ toilet will suffice. There is just one way for pulling the bowl back 2 inches.

How do you measure a toilet rough in of 10 or 12 inches?

Remove the toilet tank cover and turn the toilet on its side to get access to the bottom of the base. Measure from the rear border of the base to the closet or drain hole’s center. Make a note of whether the measurement is 10 or 12 inches.

What is the most powerful toilet flush?

Reviews of the Most Powerful Flushing Toilets in 2019

  1. Drake (Series I) Elongated Toilet by TOTO.
  2. TOTO Ultramax II Universal Height Toilet, 1.28 GPF
  3. Champion 4 toilet by American Standard (Updated Model)
  4. 2-Piece ADA Toilet by Toto Drake.
  5. H2Optimum Siphonic Toilet from American Standard.
  6. Entrada de Toto.
  7. Cadet American Standard Right Height

How do you calculate the cost of a toilet replacement?

Measure from the middle of the rear bolts on your present toilet if it has four. The rough-in measurement is the name given to this measurement. The rough-in measurement for a normal toilet should be between 11 and 13 inches. Keep this dimension in mind while shopping for a new toilet.

Is it possible to convert a two-piece toilet to a one-piece toilet?

In terms of service life and operation, both kinds of toilets are equivalent, but a two-piece toilet is typically more cheap to replace. Each component is offered separately, allowing you to change the tank or bowl as needed. If a one-piece toilet fails, the complete unit must be replaced.

Should the toilet flange be placed on top of the tile?

The toilet flange should be flush with the completed floor. That is, the flange’s bottom edge must be on the same plane as the toilet. If your toilet is mounted on tile, the flange must also be mounted on tile.

The “how to measure for a 10 inch or 12 inch rough-in for a toilet” is the term that is used when installing a toilet. It refers to the distance from the floor of the space where the toilet will be installed, to the top of the bowl.